擒牛利器：“金矛出击”副图+选股指标，连续上涨后洗盘结束、准备再次发力的个股

该公式的核心在于捕捉“连续上涨后的缩量整理”形态。当个股在经历一波拉升后进入高低交替的区间震荡（即主力洗盘），且满足以下严苛条件时，副图将触发“金矛出击”信号：

趋势向好：股价站上7日均线，且价格高于20日与60日均线的均值之上10%，确保处于中期多头趋势。

动能爆发：MACD指标处于零轴上方，且红柱连续放大，显示做多动能强劲。

资金抢筹：当日成交量较前一日放大1.9倍以上，伴随阳线突破，确认主力重新发力。

当信号触发时，副图会显示紫红与青色柱体，并伴随多个醒目图标，直观提示买入时机。

 

实战使用方法

一键选股：利用选股公式进行全市场扫描，快速剔除弱势股，将符合“洗盘结束+放量突破”特征的标的纳入自选股池。

结合盘面：选出股票后，切回副图观察“金矛出击”信号出现的频率与位置。建议结合板块热点与基本面进行二次确认，切勿仅凭单一指标盲目重仓。

 

{思路：连续上涨后的缩量整理形态，并结合中期均线趋势、动量指标向好以及成交量显著放大等多重条件，筛选出主力洗盘结束、准备再次发力的个股}
gspt1:=C>REF(C,1) AND C>REF(C,2);
gspt2:=REF(gspt1,1) AND C<=REF(C,1) AND C>=REF(C,2);{上涨后进入区间震荡交替}
gspt3:=REF(gspt2,1) AND C>=REF(C,1) AND C<=REF(C,2);{震荡：高低交替收线}
gspt4:=REF(gspt3,1) AND C<=REF(C,1) AND C>=REF(C,2);
gspt5:=REF(gspt4,1) AND C>=REF(C,1) AND C<=REF(C,2);
gspt6:=REF(gspt5,1) AND C<=REF(C,1) AND C>=REF(C,2);
gspt21:=REF(gspt6,1) AND C>=REF(C,1) AND C<=REF(C,2);
gspt22:=REF(gspt21,1) AND C<=REF(C,1) AND C>=REF(C,2);
gspt23:=REF(gspt22,1) AND C>=REF(C,1) AND C<=REF(C,2);
A10:=REF(gspt23,1) AND C<=REF(C,1) AND C>=REF(C,2);
A11:=REF(A10,1) AND C>=REF(C,1) AND C<=REF(C,2);
A12:=REF(A11,1) AND C<=REF(C,1) AND C>=REF(C,2);
gspt31:=C< REF(C,1) AND C< REF(C,2);{连续两根K线收盘价走低}
gspt32:=REF(gspt31,1) AND C>=REF(C,1) AND C<=REF(C,2);{下跌后进入区间震荡交替}
gspt33:=REF(gspt32,1) AND C<=REF(C,1) AND C>=REF(C,2);{震荡：高低交替收线}
gspt34:=REF(gspt33,1) AND C>=REF(C,1) AND C<=REF(C,2);
gspt35:=REF(gspt34,1) AND C<=REF(C,1) AND C>=REF(C,2);
gspt36:=REF(gspt35,1) AND C>=REF(C,1) AND C<=REF(C,2);
gspt37:=REF(gspt36,1) AND C<=REF(C,1) AND C>=REF(C,2);
gspt38:=REF(gspt37,1) AND C>=REF(C,1) AND C<=REF(C,2);
gspt39:=REF(gspt38,1) AND C<=REF(C,1) AND C>=REF(C,2);
B10:=REF(gspt39,1) AND C>=REF(C,1) AND C<=REF(C,2);
C23:=REF(gspt31 OR gspt32 OR gspt33 OR gspt34 OR gspt35 OR gspt36 OR gspt37 OR gspt38 OR gspt39 OR B10,1) AND gspt1;{前期震荡筑底，今日转连续上涨}
C24:=REF(gspt1 OR gspt2 OR gspt3 OR gspt4 OR gspt5 OR gspt6 OR gspt21 OR gspt22 OR gspt23 OR A10 OR A11 OR A12,1) AND gspt31;{前期高位震荡，今日转连续下跌}
DIFF:= EMA(C,9)-EMA(C,26);{MACD差值}
DEA:=EMA(DIFF,12);
MACD:=2*(DIFF-DEA);
量化指标公式库:=50*(IF(MACD>REF(MACD,1) AND REF(MACD,1)>0 AND REF(MACD,2)>REF(MACD,1),0.2,0));{MACD红柱连续放大标记}
金矛出击:=C23 AND C>EMA(C,7) AND MACD>0 AND C>((MA(C,20)+MA(C,60))/2+(MA(C,20)+MA(C,60))/2*0.1) AND 量化指标公式库 AND V/REF(VOL,1)>1.9 AND C>REF(C,1);
STICKLINE(金矛出击,0,10,2,1),COLORLIMAGENTA;
STICKLINE(金矛出击,0,3.5,3,0),COLOR0000FF;
STICKLINE(金矛出击,0,2.5,3,1),COLOR00FFFF;
DRAWICON(金矛出击,10.1,9);
DRAWICON(金矛出击,2.2,13);
DRAWICON(金矛出击,1.2,13);
DRAWICON(金矛出击,9.2,38);
DRAWICON(金矛出击,6.2,38);
DRAWICON(金矛出击,5.2,32);
DRAWICON(金矛出击,6.2,33);
DRAWICON(金矛出击,4.6,5);

 

gspt1:=C>REF(C,1) AND C>REF(C,2);
gspt2:=C< REF(C,1) AND C< REF(C,2);
gspt3:=REF(gspt2,1) AND C>=REF(C,1) AND C<=REF(C,2);
gspt4:=REF(gspt3,1) AND C<=REF(C,1) AND C>=REF(C,2);
gspt5:=REF(gspt4,1) AND C>=REF(C,1) AND C<=REF(C,2);
gspt6:=REF(gspt5,1) AND C<=REF(C,1) AND C>=REF(C,2);
gspt7:=REF(gspt6,1) AND C>=REF(C,1) AND C<=REF(C,2);
gspt8:=REF(gspt7,1) AND C<=REF(C,1) AND C>=REF(C,2);
gspt9:=REF(gspt8,1) AND C>=REF(C,1) AND C<=REF(C,2);
gspt10:=REF(gspt9,1) AND C<=REF(C,1) AND C>=REF(C,2);
gspt11:=REF(gspt10,1) AND C>=REF(C,1) AND C<=REF(C,2);
gspt12:=REF(gspt11,1) AND C<=REF(C,1) AND C>=REF(C,2);
gspt13:=REF(gspt12,1) AND C>=REF(C,1) AND C<=REF(C,2);
gspt14:=REF(gspt13,1) AND C<=REF(C,1) AND C>=REF(C,2);
gspt15:=REF(gspt14,1) AND C>=REF(C,1) AND C<=REF(C,2);
gspt16:=REF(gspt15,1) AND C<=REF(C,1) AND C>=REF(C,2);
gspt17:=REF(gspt16,1) AND C>=REF(C,1) AND C<=REF(C,2);
gspt18:=REF(gspt2 OR gspt3 OR gspt4 OR gspt5 OR gspt6 OR gspt7 OR gspt8 OR gspt9 OR gspt10 OR gspt11 OR gspt12 OR gspt13 OR gspt14 OR gspt15 OR gspt16 OR gspt17,1) AND gspt1;
gspt19:= EMA(C,9)-EMA(C,26);
gspt20:=EMA(gspt19,12);
gspt21:=2*(gspt19-gspt20);
gspt22:=50*(IF(gspt21>REF(gspt21,1) AND REF(gspt21,1)>0 AND REF(gspt21,2)>REF(gspt21,1),0.2,0));
金矛出击X:gspt18 AND C>EMA(C,7) AND gspt21>0 AND C>((MA(C,20)+MA(C,60))/2+(MA(C,20)+MA(C,60))/2*0.1) AND gspt22 AND V/REF(VOL,1)>1.9 AND C>REF(C,1);